A-61671 / TWAIN February 2013 51
If your goal is to sort document separator
sheets with patch codes (or color toggle
patch sheets) from your other documents,
configure the Stacking settings as follows:
Stack to put detected documents in:
2 (stack #2)
and set the Detect Based On: Patch Type
option to one or more patch types.
Inserted patch documents used for
document separation are normally ordered
in bulk or printed on demand. For controlled
dual stacking find a stiff paper that works
well with your job and print the patch
documents on this paper; this aids with
reliable sorting and stacking.
To Next Page
Loading...
