6 A-61671 / TWAIN February 2013
4. Select the appropriate options on the General tab.
NOTE: If necessary, review each setting on the other tabs and
make any changes.
5. Place one representative document in the input elevator of the
scanner.
6. Select Preview to review the resulting image.
NOTE: If the images are not acceptable, you can either select a
different predefined Setting Shortcut or make additional
changes on the rest of the tabs on the Image Settings
window.
7. Select the desired Device settings by selecting Device on the
Image Settings window to display the Device Settings window.
8. Review each tab and select the appropriate options or actions you
want the scanner to perform.
9. Select Home to return to the main Scanner window.
10.Select Save As to display the Save As window or click Save to save
the Setting Shortcut under the same name.
11. Enter a new shortcut name that is meaningful to you and select
Save.
To Next Page
Loading...
