Kodak KODASCOPE EIGHT 70 - img006

SCREW on the base and tilting the
Kodascope, then tightening SCREW.
Make sure that the belts are in the
grooves of
the pulleys.
Regulate the speed of the motor
by turning the SPEED ADJUSTING KNOB
(page 3) to the right or ]cft. j\el'fl' stop
th e motor with this knob.
Turn the LAMP SWITCH (page 3) to
OJJ, and thread th e Kodascop e.
THREADING • ••
Open the GATE by pushin g fOl'\"ard
on the CATCH until it latches.
Place the reel of film on the SUPPLY SPINDLE so that the film draws
from the bottom of reel, with the shiny side of fi lm towards the center
4 of the reel. The pictures must be upside down and the perforated edge