Customer Support: http://www.pandigital.net/kodaksupport 17
Using the Scan PC Software
CAUTION: To maximize memory usage, close all other applications programs before scanning multi-image filmstrips.
After your first scan, a folder titled PHOTO1 is added to the file structure as follows:
~ Memory Card: \PHOTO1
~ Scan to PC: WINDOWS XP: C:\Documents and Settings\(your username)\My Documents\My Pictures\PHOTO1
WINDOWS VISTA or WINDOWS 7: C:\Users\(your username) \Pictures\PHOTO1
You can click the
button to select a different location if desired.
4. Scan your original as instructed beginning on page 11.
5. The scanned picture is saved to the location you selected in step 2 above.
Each scanned picture is given a file name with the prefix
EK_ followed by a 4- digit sequential number in the order the
pictures are stored. For example,
EK_0001.jpg, EK_0002.jpg.
If the file name reaches
EK_9999.jpg in the PHOTO1 folder, a new folder titled PHOTO2 is automatically created to
store subsequent new files, and so on.
Note: There can be up to 9 folders (
PHOTO1..9, EK_0001... EK_9999) on a memory card. If exceeded, the
Status/Card indicator light blinks.
Launch Scan PC Software Manually
Uninstall the Scan PC Software
1. From the PC Start menu, select All Programs>Scan PC Software>Uninstall.
2. Follow the uninstall wizard to uninstall the software.
3. Restart your PC when prompted to do so.
If you choose to restart later, be aware that the
Scan PC Software uninstall does not complete until you restart the PC.
Scan Mac Manager (Macintosh)
With the Scan Mac Manager, you can easily scan photos and save the scanned images directly to the connected computer. You
can also choose the location where the scanned images are saved.
System Requirements
Operating system: MACINTOSH OS X v10.6.x, MACINTOSH OS X v10.5.x, MACINTOSH OS X v10.4.x
Intel Duo Core/G3 processor
1.2GHZ or better/G3 processor speed
128MB RAM
10MB free hard disk space
USB 2.0 compatible
1. When the scanner is connected via USB cable to the PC, the Status/Card
light blinks. The
Scan PC Software window appears.
2. Specify the location where you want the scanned pictures to be saved:
~ Memory Card
~ Scan to PC
3. Click
Apply; the window closes.
Double-click the
icon on the Desktop, or right-click the icon in the system tray and select Setting.
If you want to close the Scan PC Software temporarily, right-click on the icon and select Exit.
Installing the Scan Mac Manager
1. Connect the Scanner to your computer (see instructions beginning on page 14), using the included SD card.
2. Open a Finder window.
3. Select
KODAKSCAN>KODAK>Software>KODAK_Scan_Mac_Software_Setup_Vxxxx.
4. Double-click the
ScanMac_KODAK_Scanner_Setup_Vxxxx.zip file.
5. Double-click Scan2Mac to begin the installation.
6. Follow the on-screen instructions to complete the installation.
7. Click Restart to restart your computer.
8. The Scan Mac Manager automatically starts when the restart is complete.
Once installed, the
Scan Mac Manager opens whenever you connect the Scanner.
To Next Page
Loading...
