Kodak P811 - Using the Scan Mac Manager; Manually Start the Scan Mac Manager; Uninstalling the Scan Mac Manager; KODAK EASYSHARE Software for PC

18 Customer Support: http://www.pandigital.net/kodaksupport
Using the Scan Mac Manager
File Naming Convention
Each scanned image is given a file name with the prefix EK_ followed by a 4- digit sequential number in the order the
images are stored. For example,
EK_0001.JPG, EK_0002.JPG.
If the file name reaches
EK_9999.JPG in the PHOTO1 folder, a new folder titled PHOTO2 is automatically created to store
subsequent new files, and so on.
There can be up to 9 folders (
PHOTO1..9, EK_0001... EK_9999) on a memory card. If exceeded, the Status/Card
indicator light blinks. Delete some files on the memory card or use another one if necessary.
Manually Start the Scan Mac Manager
1. Open a Finder window.
2. Click Applications, and then double-click .
Uninstalling the Scan Mac Manager
1. Close the Scan Mac Manager by clicking the icon in the top Finder bar, and then click Exit.
2. Click Yes to confirm you want to exit the application.
3. Open a Finder window.
4. Click Applications, right-click Scan Mac, and then select Move to Trash.
KODAK EASYSHARE Software for PC
After using Scan PC Software for KODAK Personal Photo Scanners to scan and store your pictures on your PC, you can use
EASYSHARE Software to organize, edit, print, and share your pictures online.
System Requirements
 Operating system: WINDOWS XP, WINDOWS VISTA, WINDOWS 7
 Intel Pentium IV processor
 1.2GHZ or better processor speed
 512MB RAM
 200MB free hard disk space
Install EASYSHARE Software
1. When the Scanner is connected via USB cable to the computer,
the Status/Card light blinks. The
Scan Mac Manager window
appears.
2. You can specify the location where you want the scanned images to be
saved, either on the memory card or in a specific folder on the computer.
After your first scan, a folder titled PHOTO1 is added to the file structure.
Therefore, if Scan Mac is selected, the scanned images are saved to the
following location by default:
/Users/(your username)/Pictures/PHOTO1/
You can also click the
button to select a different location if you
prefer.
3. Click
Apply; the window closes.
4. Scan your original as instructed beginning on page 11.
5. The scanned image are saved to the location you selected in step 2 above.
1. Insert the SD Memory Card into the scanner.
2. Connect the scanner to your PC (see instructions beginning on page 14)
using the included SD card.
Scan Mac