Customer Support: http://www.pandigital.net/kodaksupport 7
Rear View
No. Name Function/ Description
Output slot The scanned original exits from this slot.
SD/xD/MMC/
MS Card slot
Accepts the following types of memory cards: SD, xD, MMC and MS. Also accepts
MICROSD Cards with an SD adapter. (Refer to "Supported Memory Cards" on page 9.)
Bottom View
Scanner Indicator Lights
Listed below are the indicator light patterns and the functions they represent:
Blinking slowly
Blinking rapidly
Steadily on
Off
Power
Status
/Card
(orange)
(green)
The scanning resolution setting is indicated by color of Status/Card light.
600dpi – The scanner is ready for use in 600dpi mode (default).
300dpi – After scanner is ready in 600dpi mode, press the power button again for
300dpi mode.
(green)
(color)
Initializing system and memory card. Please wait until the initialization process is complete before
using the scanner.
Busy scanning and storing picture files. Please wait until the process is complete before scanning
another original.
Battery compartment
takes 4 AAA (UM-4) batteries
(not included)
There is no battery charging
function in this scanner.
Recommend using NiMH rechargeable type batteries. We do not
recommend or support alkaline batteries. For acceptable battery
life, and to make sure your scanner operates dependably, use
recommended batteries.
To Next Page
Loading...
