Kodak Pixpro 4KVR360 - Page 26

25
Self Timer
Setting a self-timer function.
There are 3 options:
Ù
4FMG5JNFS0ūÙ 4FMG5JNFSTFDÙ Self Timer -10sec
EIS
Set electronic image stabilization (EIS) function.
There are 2 options:
Ù
&OBCMFÙ O
Motion detection
Motion detection means that if the product detects moving objects entering into the view, it will automatically start recording. During the recording process, if
there is no moving object detected for 10 continuous seconds, the recording will pause automatically.
There are 2 options:
Ù
&OBCMFÙ O
Operation method:
1.
Select
, and return to the main interface.
2. The display will sho
w the
icon. Press the button to activate. If the product detects moving objects, it will automatically start recording.
3. The product will stop recording when there is no change in the image within 10 seconds. When the image changes again, the product will start recor
ding
automatically
, and a new video ile will be generated after each pause and restart.
1 2
ʒ indicates the total time of recording
ʓ indicates the total time from enable the Motion detection
4. Press the button again to stop recording and detecting.
Wind cut
Wind cut refers to the reduction of noise caused by wind.
There are 2 options:
Ù
&OBCMFÙ O