18 Kodak Prosper S10 Printer
Chapter 2. Printer Operation
Fluid Container Replacement
2. Open the print station front door (Figure 5).
a. Remove the expired ink card and recycle it in a local recycling
system.
b. Insert the new ink card (the gold square contact faces out) into
the smart card reader, until the black horizontal marks do not
show.
c. Close the print station front door.
Figure 5 Ink card and smart card reader
Make sure to disconnect the supply line before the cap/feed tube are
removed from the empty container. The internal tank will empty of all
fluids and the print station will shut down. “INK TANK EMPTY” will show
on the system controller.
3. At the empty ink container, push the quick-disconnect button to
disconnect the supply line from the empty ink container (Figure 6).
a. Remove the cap/feed tube from the empty ink container. Do not
disconnect the feed tube from the cap.
b. Discard the empty container; follow all applicable regulations for
waste fluid. Use the solid cap from the new ink container to seal
the empty ink container.
Figure 6 Empty ink container
Quick disconnect button
Cap/feed tube
Supply line
To Next Page
Loading...
Need help?
General