TP-6376 3/0830 Section 2 Trailer Hookup, Transport, and Setup
2.10 Generator Set Removal from
Trailer, 60--200KRP
The following paragraphs describe the method to
remove the generator set/weather housing/fuel tank
from the trailer. Select moving equipment capable of
handling the weight and size of the generator set. See
Section 1, Specifications and Features, for weights.
Have trained personnel lift and move the generator set.
The contractor and/or generator set distributor should
decide on the best equipment based on the specific
situation and conditions.
Before removing the generator set/housing/fuel tank
from the trailer, stabilize the trailer using the trailer
tongue jack stand and rear leveling jacks. Empty the
fuel tank, when possible, before removing the generator
set/housing/fuel tank from the trailer.
Remove all mounting hardware between the generator
set and trailer. Store mounting hardware in the trailer
utility box.
Lift the generator set at a single point or bridle. See
Figure 2-5.
1
1. Generator set/weather housing/fuel tank lifting eye
60TP
Figure 2-5 Single-Point Lifting Eye, 60--200KRP
2.11 Generator Set Removal from
Trailer, 400KRP
To access the generator set and fuel tank, remove the
housing. Refer all generator set and fuel tank removal
from the trailer to a competent, commercial hauler/
rigger where trained personnel with specialized tools
and equipment are capable of handling the size and
weight of this equipment.
To Next Page
