Kohler 6VSG Manual

38 Section 3 VSC Controller Operation TP-6843 7/15
3.16.1 Networking Status Submenu
The Networking Status submenu contains settings for
OnCue
®
. See Figure 3-22. See the OnCue
®
Software
Operation Manual for information about the
appropriate network settings for OnCue
®
. Changes to
these settings are not typically required.
If DHCP is enabled, IP parameters are not displayed.
If DHCP is disabled (i.e., if a static IP address is used),
the IP parameters are displayed.
To enable or disable DHCP and change the IP
settings, go to the Networking Configuration menu.
See Section 3.16.2.
Figure 3-22
Figure 3-22 Network Status Submenu
tp68
IP Address:
123.456.789.123
Gateway:
123.456.789.123
<---- Return
Subnet Mask:
123.456.789.123
DHCP:
Enabled
Ethernet Status:
Disconnected
DNS 1:
123.456.789.123
DNS 2:
123.456.789.123
OnCue Server:
123.456.789.123
OnCue Status:
Connected
Networking---->
Status
Networking---->
Information

Kohler 6VSG Specifications

General

Brand	Kohler
Model	6VSG
Category	Portable Generator
Language	English