Kohler KD83V16

Repair Service and Repair Manual
Exhaust gas system
Fig. 214: Exhaust pipe screws and plugs
Reference
Key Screw specifications
Lubricant *
Reuse**
Torque Angle (°)
Step
± 5%
Step
± 5°
1 410AA DRW 10123168 M10x1.5x80-C3J MH No 1 52 Nm
38 ft-lb
- -
2 410AC DIN 908 M14x1.5 MH Yes 1 35 Nm
26 ft-lb
- -
3 410AD DIN 908 G3/8 A MH Yes 1 60 Nm
44 ft-lb
- -
4 410AE DIN 908 M16x1.5 MH Yes 1 50 Nm
37 ft-lb
- -
5 410AF M8x1.25 MH Yes 1 20 Nm
15 ft-lb
- -
Tab. 42: Tightening specifications table
*Lubricants:
MG = Molykote G-n-plus
MW = Castrol Optimol paste white T
MH = Molykote HSC
O = Engine oil
XX = Loctite 243
YY = Loctite 577
**Refer to screws reuse rules. (For more information see: 5.3.2 Screws pre-tightening, reuse and
marking, page 274.)
190
© 2021 by Kohler Co. All rights reserved.
KD83V16 33525088901_2_1 EN_US
2021-07