Operation and Maintenance Manual Contents
5.8.1 Coolant sampling — SL120
111
5.8.2 Checking coolant level — SL001
111
5.8.3 Inspecting low temperature circuit (charge air cooler) — SL002
112
5.8.4 Checking relieve bores — water/coolant pump — SL003
113
5.8.5 Coolant drain points — SL116
114
5.9 Fuel system
117
5.9.1 Draining off water from fuel prefilter — SL004
117
5.9.2 Replacing main filter - SL105
117
5.9.3 Bleeding the fuel system
118
5.9.4 Checking differential pressure — fuel prefilter — SL005
118
5.10 Air system
119
5.10.1 Check service indicator on air filter — SL006
119
5.11 Lubricants and operating fluids
120
5.11.1 Handling lubricants and operating fluids
120
5.11.2 Filling volume
121
5.11.3 Diesel fuels
121
5.11.4 Diesel engine lubricants
125
5.11.5 Diesel engine coolant
129
6 Operating faults
135
6.1 Diagnosis principles
135
6.2 Faults - Cause - Remedy
136
7 Tools and devices
141
7.1 Tools
141
7.1.1 Special tools
141
8 Appendix
145
8.1 Technical design documents
145
8.2 Error code
146
8.3 Cleaning agents, thread-locking adhesives and greases
158
8.3.1 Cleaning agents and thread-locking adhesives
158
8.3.2 Greases
158
8.4 Standard tightening torques
159
8.4.1 Screws pre-tightening, reuse and marking
159
KD83V16 33521030601_0_1 EN_US
2018-07
© 2018 by Kohler Co. All rights reserved.
13