Kohler KD83V16 User Manual

Contents Operation and Maintenance Manual
8.4.2 Standard torques for hexagonal / cylinder / external hexalobular heads
161
8.4.3 Standard torques for locking screws and banjo bolts
163
8.4.4 Standard torques for metric flange joints
164
8.4.5 Standard torques for metric thread unions L series (up to 500 bar/7252
Psi) 164
8.4.6 Standard torques for metric thread unions S series (up to 800 bar/
11603 Psi) 165
8.4.7 Standard torques for imperial thread unions L series (up to 500 bar/
7252 Psi) 166
8.4.8 Standard torques for imperial thread unions S series (up to 800 bar/
11603 Psi) 167
8.4.9 Standard torques for metric thread unions L series (up to 500 bar/7252
Psi) for aluminum 167
8.4.10 Standard torques for cutting ring flange joints
168
8.4.11 Standard torques for triple lock flange joints
169
8.4.12 Standard torques for VSTI screw plugs
170
8.5 Abbreviations - Acronyms
172
8.6 Unit conversion tables
174
8.6.1 Length conversion factors
174
8.6.2 Mass conversion factors
174
8.6.3 Pressure conversion factors
174
8.6.4 Volume conversion factors
174
8.6.5 Power conversion factors
175
8.6.6 Moment of inertia and torque conversion factors
175
8.6.7 Fuel consumption conversion factors
175
8.6.8 Flow conversion factors
175
8.6.9 Temperature conversion factors
175
8.6.10 Density conversion factors
175
8.7 Prefix
177
14
© 2018 by Kohler Co. All rights reserved.
KD83V16 33521030601_0_1 EN_US
2018-07

Kohler KD83V16 Specifications

General

Brand	Kohler
Model	KD83V16
Category	Engine
Language	English