Operation and Maintenance Manual Product description
Technical description
Fig. 3: Diesel engine / view from the damper side
CCS Engine front (vibration damper side) 12 Cylinder head cover
9 Vibration damper cover 13 Charge air pipe
10 Engine control unit - ECU (x2) 14 Starter (x2)
11 Straight air intake (x4) 15 Oil pan
Design
Water-cooled Diesel engine with common rail (CR), exhaust gas turbo charging and air to water
charge air cooling.
Characteristics
A robust basic design and generous dimensioning form the basis for high operational safety and a
long service life. Low fuel consumption and exhaust gas emissions by optimized combustion
process adapted to the emission requirements. Minimized maintenance obtained by optimized
engine components and accessories lead to higher availability and increased efficiency.
Driving gear
The V16 Diesel engine has a quench tempered steel crankshaft with inductively hardened pins and
fillets. A torsional vibration damper is mounted on the crankshaft on the engine damper side.
Precisely forged con-rod, driving gear bearings are sputtered. Steel top weld pistons with stage
support and cooling duct
KD83V16 33521030601_0_1 EN_US
2018-07
© 2018 by Kohler Co. All rights reserved.
19
To Next Page
Loading...
Need help?
General
