Need help?Do you have a question about the KOHTECT qb701 and is the answer not in the manual?
General| Brand | KOHTECT |
|---|---|
| Model | qb701 |
| Category | Measuring Instruments |
| Language | English |
General safety instructions for operating the machine measurement system, including power switch precautions.
Specific safety guidelines for laser operation, including warnings and compliance standards.
Declaration of compliance with EMC and ROHS directives for the qb701 Shaft Alignment Tool.
Describes the qb701 alignment system's purpose for measuring and calculating adjustments for shaft misalignment.
Explains parallel (Offset) and angular (Gap) misalignment of shafts and their correction.
Lists the technical specifications and built-in application programs and options of the qb701 system.
Lists the components included in the qb701 system package with corresponding numbers.
Provides a visual overview of the measuring units, highlighting key components like detector window and laser aperture.
Step-by-step instructions for mounting transducers, including tightening rods and angular position.
Instructions on how to adjust the laser beam alignment for the transducers' windows.
Explanation of the function of common control buttons like Power, Menu, and Start for device operation.
Steps to access and navigate the device's setup menu for configuration.
Instructions on how to configure the date and time settings of the device.
Configuration of the device's power management features, including auto-off delay.
Instructions for installing license files to enable specific measurement functions.
How to switch between wireless and cable transducer connection modes.
How to select the user interface language from a provided list.
Switching the device to USB mass storage mode for PC connectivity.
Instructions for adjusting the display backlight brightness.
Choosing the default alignment mode, such as biaxial or 1-D.
Overview of the steps for performing horizontal machine alignment.
Conventions for positioning transducers on shafts for accurate horizontal alignment measurements.
Setting parameters and editing dimensions within the alignment program.
Instructions on entering tolerance setup menus and using predefined or user-defined values.
Step-by-step guide for taking measurements using the clock mode with shaft rotations.
Guide for collecting readings using the multipoint mode at various shaft positions.
Instructions on activating and using the auto shooting mode for automated measurement recording.
How the device assesses data quality using color indicators for measurement points.
Process for editing or deleting collected measurement data when poor quality is detected.
Explanation of the result screen displaying misalignment values and required correction directions.
Procedures for making vertical and horizontal adjustments to the movable machine based on readings.
Specific procedures and options for using the system with machines that have a spacer shaft.
Functionality to lock feet pairs, applicable for machines with or without a spacer shaft.
Instructions on how to save measurement reports to internal SD card or thumb drive.
Explains the soft foot condition and how to use the Soft Foot program to eliminate it prior to alignment.
Overview of the steps for performing vertical machine alignment.
Conventions for transducer positioning specific to vertical alignment measurements.
Setting parameters for the Vertical program, including data input and angle input.
Steps for taking measurements in clock mode for vertical alignment, including manual angle input.
Explanation of the result screen for vertical alignment, showing misalignment and correction values.
Using 45° transducer positions to simplify shaft turning during correction plane switching.
Instructions on how to charge the device's battery using AC charger or USB.
Step-by-step guide for upgrading the device firmware using a USB thumb drive.
Instructions for upgrading firmware via PC using Windows Mobile Device Center.
Provides standard alignment tolerances for industrial machinery based on RPM.
Lists the complete contents of the product delivery package, including all accessories.
To Next Page