KOHTECT qb701 - FIRMWARE UPGRADE (MOBILE DEVICE CENTER); Firmware Upgrade (Mobile Device Center)

41 pages

To Next Page

To Previous Page

qb701 User’s Manual

FIRMWARE UPGRADE USING WINDOWS MOBILE DEVICE CENTER

Make sure that device battery is fully charged!

1. Connect AVV-711 to PC via USB cable. Press and hold key for ~2 sec to turn

qb701 on. Windows Mobile Device center will

launch. Connect to qb701 and browse to the

folder

“Storage Card/LaserAlignment/AvvUpd.ate/”

and paste there the firmware file

Avv711Install.cab

2. Wait until file copied.

3. Invoke firmware updater by pressing

keys simultaneously.

4. Press to confirm start of firmware upgrade.