qb701 User’s Manual
12
GETTING STARTED
COMMON CONTROL KEYS CONSIDERATION
To turn ON/OFF display unit and transducers – press and hold the power button for
~2 sec.
In case the system hangs and device did not respond to any keys - press and hold the
power button for ~10 sec, the system will be reset.
To close any currently active window, without saving, except main menu of the device,
press button (it serves as escape key).
The button in most cases causes applying (saving) changes (invoke selection) and exit
(from edit box; or from current window, except such windows as collect data, aligning, soft
foot and so on where it is not applicable).
To invoke menu item – move cursor to this item and press key, or just press the
shortcut key regardless of the cursor position. In most cases the shortcut key is depicted
left to the menu item.
AUTO SAVE
All procedures are designed with auto save. For temporarily shut down your current work
press until program exits to main menu of the device. Data saved now and device can
be turned off.
DEVICE SETUP
To invoke Setup menu – move cursor to
Setup icon and press button, or press
key.
To Next Page
Loading...