Koldfront WTC12000W User Manual

3
Preparations for Installation
NOTE: To avoid risk of injury and/or product/property damage,
please take the following precautions:
- Two or more people are needed to properly handle and install.
- Use proper lifting and carrying techniques.
- Wearing protective gloves will help to avoid injury from sharp
edges.
Before you begin, make sure you have all the parts necessary for
installation.
Name
Spec.
Qty
Tapered Spacer Blocks
17” Long
2
Centering/Support Blocks
4 ½” x 3 ½“ x 1 ½“
4
Plastic Divider
⅛ “x 4 ½“ x 14 ½“
2
Stuffer Seal
1” x 1 ½“ x 84”
1
Seal
1” x 1 ½” x 25”
3
Seal
1” x 1 ½“ x 14
2
Seal
1” x ⅜” x 25”
3
Seal
1” x ⅜” x 14”
2
Seal
1” x ¾” x 14”
2
Trim frame (side legs)
2
Trim Frame (top & bottom legs)
2
Ground Wire (green)
1
Toothed Washer for grounding screw
2
Grounding Screw
1
Grille (plastic)
1
Grille Aluminum
1
Nuts (plastic)
4
Screw Washer
4
Screw
4
Tools Needed:
Flat Screwdriver
Phillips Screwdriver
Tape Measure
Level
Drill
NOTE: You may need to
contact your electrician if
your room’s circuit is not
able to power your unit.

Koldfront WTC12000W Specifications

General

Brand	Koldfront
Model	WTC12000W
Category	Air Conditioner
Language	English