13
Control Panel Operations
Using the Control Panel
To Turn Unit on:
Press the On/Off button . Note-The Energy Saver feature will automatically turn on in
“Cool”, “Dry”, and “Auto” mode.
To Change Temperature:
Press or hold either the Up or Down button until the desired temperature is seen on
the digital display. This temperature will be automatically maintained anywhere between 62 °F
(17°C) and 86°F (30°C).
To Adjust Fan Speeds:
To select the speed of the fan press Fan Speed button which cycles through four steps-
Auto, Low, Medium, or High. Each time the button is pressed the fan speed mode is shifted.
Note: During “Dry Mode” the fan speed is controlled at Low automatically.
To Next Page
Loading...
Need help?
General
