K3 IMU
GPS on/off
For all the running GNSS constellations or the augmentation system,KOLIDA K3 IMU allows to
configure to use which satellite or not.
In gnss on/off page, all the running satellites are listed, and unselect the box corresponding to the
satellite to not use it.
§3.4.4 Data Record
The “Data Record” performance is mainly used to configure all the parameters for receiver in
static mode. Much more operations can be done on KOLIDA K3 IMU such as storage path,
interval, data format and data files download.
Recording Config
The page provides more practical operations for raw data storage.
To Next Page
Loading...
