K3 IMU
§4.3 Differential Antenna
The UHF differential antenna is required to install to the interface at the bottom of receiver if
KOLIDA K3 IMU is set up into internal UHF mode.
§4.4 Cables
Type-C data cable
The cable is to connect the receiver and the computer to transfer static data and upgrade the
host firmware.
§4.5 Other Accessories
Other accessories include carbon fiber pole, controller bracket, connector, tribrach, etc.
The model and type of instrument accessories will change with the upgrade of the instrument. The
specific configuration can refer to accessories list.
To Next Page
Loading...
