Kolida K3 IMU User Manual

K3 IMU
- 6 -
Advanced UHF module
KOLIDA K3 IMU enjoys a new and excellent datalink system, which is compatible with current
radio protocols in the market, and realizes the random switching of the radio range
410MHZ-470MHZ. “Farlink” technology improves the signal-catching sensitivity from -110db
to-117db, so K3 IMU can catch the very weak signal from a base station far way.
Internal Web UI management
Embedded Web UI management platform supports WIFI and USB mode connection. Users can
monitor the receiver status and configure it via the internal Web UI management platform.
Bluetooth and NFC
KOLIDA K3 IMU is equipped with dual-mode Bluetooth v4.0 standard which is able to connect
the other smart devices and compatible with Bluetooth v2.1 standard. It not only enlarges the
work range but also makes the data communication become more stable. The internal NFC
module can make the complicated Bluetooth communication easy and simple.
WiFi
As the new feature and technology adopted on K3IMU, it not only can be used as data link to
access to internet, but also can be as a hotspot which can be accessed by any other smart devices
to configure the receiver.
Intelligent Storage
The raw data including STH, Rinex2.01 and Rinex3.02 not only can be saved in the internal
memory (8G SSD), but also can be stored into an external USB device (OTG). The configurable
sample frequency is really up to 20Hz.

Kolida K3 IMU Specifications

General

Brand	Kolida
Model	K3 IMU
Category	Measuring Instruments
Language	English