Komfovent DOMEKT C8 automation User Manual

12
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_guide_21-07
EN
3.1.6. Air quality control mode activation and settings
If air quality sensors are connected to the main board or impurity control/moisture control function is activated (see “Ad-
vanced Settings”), button “Scheduling” appears instead of “Air quality” button. For more information about the air quality
control function see chapter “Air Quality Control Functions”.
To enter desired limits and turn on ventilation by air quality:
1. Press “Menu” button at the bottom of the home screen.
2. Press “Air quality” button.
3. Select a parameter you want to change.
4. Use the arrows to select a desired value and press to conrm.
5. Press a return icon at the top of the screen to return to the home screen.
6. Ventilation by air quality is turned on by pressing AUTO button while the unit is operating in any ventilation mode.
7. If the unit was stopped, pressing AUTO button will call up a message, the conrming of which will activate ventilation
by air quality.
Overview
Air quality
TURN OFF
Settings
Menu
Air Impurity
800 ppm
Air temperature
20,0 °C
Electric heater
On
Air quality
Reset settings
Air quality
Reset settings
Air Impurity
800
200 ppm
1800 ppm
16:30
IŠJUNGTA
ECO AUTO
TURN ON?
16:30
AIR QUALITY
ECO AUTO

Komfovent DOMEKT C8 automation Specifications

General

Brand	Komfovent
Model	DOMEKT C8 automation
Category	Air Handlers
Language	English