Komfovent DOMEKT C8 automation User Manual

27
UAB KOMFOVENT we reserve the right to make changes without prior notice
DOMEKT_C8_guide_21-07
3.4.3. Air quantity and temperature settings
You can set air ow of supply and exhaust air, desired temperature and turn o/on an electric heater for each ventilation
mode. If turned o, the heater will not turn on even when the desired temperature is not reached. If turned on, the heater will
operate only when the heat exchanger alone cannot reach the set temperature. Press “Modify” to modify operation mode
settings. After changing the settings, press “Save changes” button at the bottom of the window. Press the return symbol at
the top to return to the main window.
CONTROL
OPERATION MODES
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
20
20
20.0
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
50
50
20.0
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
70
70
20.0
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
Activate by contact
Delayed start, min
Delayed stop, min
80
80
20.0
0
0
All time
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
60
50
20.0
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
80
20
20.0
Temperature, °C
Electric heater
Micro-ventilation
Period
20.0
4 t. per day
2018-12-24 / 2019-01-02
Supply flow, %
Extract flow, %
Temperature, °C
Electric heater
100
100
20.0
SAVE CHANGES
RESTORE TO DEFAULT
INTENSIVE
NORMAL
AWAY
BOOST
HOLIDAYS
KITCHEN
OVERRIDE
FIREPLACE

Komfovent DOMEKT C8 automation Specifications

General

Brand	Komfovent
Model	DOMEKT C8 automation
Category	Air Handlers
Language	English