Konica Minolta bizhub 185 User Manual (English)

Questions and Answers:

S
susan26Aug 31, 2025
Why Konica Minolta All in One Printer print processing finished but printing doesn't start?
- J
  jordan17Aug 31, 2025
  If print processing on the computer has finished, but printing does not start on your Konica Minolta All in One Printer, check the specified printer name. Also, verify that the USB cable is correctly connected. An error may have occurred on this machine, so check the Display. Unprocessed jobs may remain on this machine and be waiting to be processed; wait until the unprocessed job is processed. Insufficient memory of the computer may also be the reason, so perform a test printing to check whether printing is possible.
W
wcooperAug 30, 2025
What to do if Konica Minolta All in One Printer has dark specks or spots on the output?
- M
  Michael RichardsonAug 30, 2025
  If there are dark specks or spots throughout the printed output of your Konica Minolta All in One Printer, the Original Glass may be dirty. Wipe it with a soft, dry cloth. Also, the Original Pad might be dirty; clean it with a soft cloth dampened with a mild detergent. If you are copying a highly translucent original, place a blank sheet of paper on top of it. If copying a thin 2-sided original, the print on the back side may be reproduced on the front; adjust the density level by pressing the * key (lighter).
M
Michael SantosAug 29, 2025
What to do if Konica Minolta All in One Printer image is partially obscured?
- J
  James WhiteAug 29, 2025
  If the image from your Konica Minolta All in One Printer is partially obscured or blurry, it might be due to damp paper. Replace it with new paper. Another cause could be that the original was not pressed closely enough against the Original Glass; reposition the original to ensure it is pressed closely.
D
Debra SalazarAug 27, 2025
What to do if Konica Minolta All in One Printer printed output is too dark?
- S
  Steven OlsonAug 27, 2025
  If the printed output from your Konica Minolta All in One Printer is too dark, it could be because the density is set to the darker side. Press the * key (lighter) in the density setting to select the desired density. Alternatively, the original may not have been pressed closely enough against the Original Glass. Ensure the original is positioned correctly.
A
Amy TownsendAug 27, 2025
What to do if Konica Minolta All in One Printer printed output is too light?
- K
  Kathryn WallaceAug 27, 2025
  If the printed output from your Konica Minolta All in One Printer is too light, it may be because the density is set too light. Press the ) key (darker) in the density setting to select the desired density. The paper may also be damp, so try replacing it with new paper.
K
Kevin SchroederAug 25, 2025
What to do if Konica Minolta All in One Printer copying does not start?
- J
  joseph76Aug 26, 2025
  If copying does not start on your Konica Minolta All in One Printer, it could be due to several reasons. First, ensure that the Fusing Unit Top Cover/1st Side Cover of the machine is securely closed. Also, the machine may still be warming up after being turned on (it takes about 30 seconds). Finally, check the display for any error messages or icons and follow the provided instructions.
H
Holly MayoAug 23, 2025
What to do if Konica Minolta All in One Printer shows "Printer is not connected"?
- L
  Larry PayneAug 23, 2025
  If you see a "Printer is not connected" or "Print Error" message on your computer screen when using the Konica Minolta All in One Printer, check the specified printer name. Also, verify that the USB cable is correctly connected. An error may have occurred on the machine, so check the display. Insufficient memory may also be the cause, so perform a test printing to see if printing is possible.

Konica Minolta bizhub 185 Specifications

General

Print Speed	18 ppm
Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Printing Technology	Laser
First Print Out Time	8 seconds
First Copy Out Time	8 seconds
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Max Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
Zoom Range	50% to 200%
Paper Size	A5 to A3