Konica Minolta bizhub 3301P - Page 144

User's Guide
- 144 -
Action
Yes
No
Step 2
Check if the printer is in Sleep mode or
Hibernate mode.
Is the printer in Sleep mode or Hibernate
mode?
Press the Sleep button to wake the
printer from Sleep mode or Hibernate
mode.
Go to step 3.
Step 3
Check if one end of the power cord is
plugged into the printer and the other to a
properly grounded electrical outlet.
Is the power cord plugged into the printer
and a properly grounded electrical outlet?
Go to step 4.
Plug one end of the power cord
into the printer and the other to
a properly grounded electrical
outlet.
Step 4
Check other electrical equipment plugged
into the electrical outlet.
Does other electrical equipment work?
Unplug the other electrical
equipment, and then turn on the
printer. If the printer does not work,
then reconnect the other electrical
equipment.
Go to step 5.
Step 5
Check if the cables connecting the printer
and the computer are inserted in the
correct ports.
Are the cables inserted in the correct
ports?
Go to step 6.
Make sure to match the
following:
• The USB symbol on the
cable with the USB symbol
on the printer
• The appropriate Ethernet
cable with the Ethernet port
Step 6
Make sure the electrical outlet is not
turned off by a switch or breaker.
Is the electrical outlet turned off by a
switch or breaker?
Turn on the switch or reset the
breaker.
Go to step 7.