What does error ED09CC mean on Konica Minolta bizhub 350 All in One Printer?
If your Konica Minolta All in One Printer displays error ED09CC, it means that SMB transmission malfunctions. Check the status of the destination device. A Scan to SMB transmission cannot be performed with a UNIX or LINUX system.
What to do if Konica Minolta All in One Printer displays error EAXXXX?
If your Konica Minolta All in One Printer displays error EAXXXX, it indicates that the LAN cable is not connected, communication to the SMTP server failed, or transmission was attempted to an incorrect destination address. Check that the LAN cable is properly connected, that the SMTP server can communicate, that the network settings such as the subnet mask are correct, and that the destination e-mail address is correct.
Why e-mail message is not delivered to the forwarding destination on Konica Minolta All in One Printer?
If the e-mail message is delivered from this machine, but it is not delivered to the forwarding destination, check the one-touch e-mail address specified for the forwarding destination. Also, the user e-mail address of the specified e-mail delivery may have returned an error e-mail message. Check the contents of the email message.
What to do if Error Code EAXXXX appears because too much data is being sent from Konica Minolta All in One Printer?
If you are getting Error Code EAXXXX on your Konica Minolta All in One Printer because too much data is being sent, and a high scanning resolution has been specified, decrease the number of pages scanned at one time and scan the document again.
How to resolve error E4DXXX on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error E4DXXX, the SMTP server address is not specified, preventing connection to the e-mail server. Specify the SMTP server address.
How to fix form that is not printing properly on Konica Minolta bizhub 350?
If the form is not printing properly from your Konica Minolta All in One Printer, this may be because the available computer memory space is not sufficient. Simplify the form to reduce the data size.
Why does Konica Minolta bizhub 350 All in One Printer fail to deliver an e-mail message?
If an attempt to deliver an e-mail message has been made, but transmission fails on your Konica Minolta All in One Printer, the e-mail address of the specified user to which the email message is to be delivered is not registered. When sending an e-mail message, the e-mail address must be specified. Register the email address of the specified user to which the e-mail message is to be delivered.
Why does the message “ImageReceiver detected of XXX” appear because other software is using the port on Konica Minolta All in One Printer?
If the message “ImageReceiver detected of XXX” appears on your Konica Minolta All in One Printer because other software is using the port, the mail server and IP Scanner cannot be used together. Do not start up the mail server. In addition, if other software is the cause, exit the software that is causing the problem. Follow the instructions to change the port.
Why the hole punch function cannot be specified on Konica Minolta bizhub 350?
The hole punch function on your Konica Minolta All in One Printer cannot be specified if “Booklet”, “Transparency”, “Thick2”, “Thick3”, or “Envelope” is selected. Check each setting in the printer driver. Also, for the hole punch function, the punch unit must be installed on optional finisher. Install the required optional finisher and enable it using the printer driver.
Why stapling cannot be performed on Konica Minolta All in One Printer?
Stapling on your Konica Minolta All in One Printer might fail if you exceed the page limit of 50 pages of Letter size or smaller plain paper. Print by specifying the number of pages per set for the number of pages that can be stapled. Also, stapling is not possible if your document contains pages of different sizes, so ensure all pages are uniform.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
Information about ENERGY STAR® compliance and its benefits for energy efficiency.
Explains the manual's structure, notations, and guides for different operations.
Explains safety advisories (DANGER, WARNING, CAUTION) and sequence of action notations.
Explains DANGER, WARNING, and CAUTION messages to prevent injury or damage.
Describes how to send scanned documents as e-mail attachments, including requirements and basic operation.
Explains uploading scanned data to an FTP server on the network for data retrieval.
Details sending scanned data to a shared folder on a computer via SMB protocol.
Explains sending original document data as an e-mail attachment over the Internet or intranet to an Internet fax terminal.
Details the physical connection of the machine to a LAN using a LAN cable and explains LED status indicators.
Explains how to specify network parameters like DHCP, IP address, subnet mask, gateway, and DNS settings.
Specifies whether to acquire an IP address automatically from a DHCP server or use a fixed IP address.
Sets the machine’s IP address when DHCP is configured for manual input.
Details how to transmit data by touching a registered one-touch dial button for e-mail destinations.
Describes how to directly input e-mail addresses for transmission without prior registration.
Explains how to adjust scan resolution (Original Type) and density for optimal image output.
Covers functions like TX Report, 2in1, Double-sided TX, Priority TX, Timer TX, Stamp, Subject, Reply Address, and File Name.
To Next Page