What to do if Konica Minolta bizhub 350 displays error ED09C6?
If your Konica Minolta All in One Printer displays error code ED09C6, it means that the LAN cable is not connected, or the destination address is incorrect. Check that the LAN cable is correctly connected. Also, check that the settings for the destination address and port number are correctly specified.
Why does Konica Minolta bizhub 350 All in One Printer fail to deliver an e-mail message?
If an attempt to deliver an e-mail message has been made, but transmission fails on your Konica Minolta All in One Printer, the e-mail address of the specified user to which the email message is to be delivered is not registered. When sending an e-mail message, the e-mail address must be specified. Register the email address of the specified user to which the e-mail message is to be delivered.
What does error ED09C8 mean on Konica Minolta bizhub 350 All in One Printer?
Error ED09C8 on your Konica Minolta All in One Printer indicates that the specified folder does not exist. Check that the save destination folder exists and verify the folder name.
Why does the message “Failed to create image files.” appear due to unusable received data on Konica Minolta All in One Printer?
If the message “Failed to create image files.” appears on your Konica Minolta All in One Printer due to unusable received data, exit ImageReceiver, start it again, and then send the scan again. When ImageReceiver is exited, received data that has not yet been processed with IP Scanner will be deleted.
What to do if Error Code EAXXXX appears because too much data is being sent from Konica Minolta All in One Printer?
If you are getting Error Code EAXXXX on your Konica Minolta All in One Printer because too much data is being sent, and a high scanning resolution has been specified, decrease the number of pages scanned at one time and scan the document again.
What to do if the administrator is logged on Konica Minolta bizhub 350 All in One Printer?
If the administrator is logged on, wait until the administrator operations are completed and the administrator has logged out. If the administrator closes the Web browser without logging out, the administrator must log in again and log off correctly.
What to do if the pages are not punched on Konica Minolta All in One Printer?
If the pages are not being punched by your Konica Minolta All in One Printer, it may be because printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting.
What to do if Konica Minolta All in One Printer displays error EAX212?
If your Konica Minolta All in One Printer displays error EAX212, it means that SMTP authentication is requested. Enable the SMTP authentication settings.
What does error ED09CA mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error ED09CA, it means that an error occurred when data was being transferred. Check that the FTP server is operating properly, or check that the LAN cable is not broken.
What to do if Konica Minolta bizhub 350 displays error EF09D0?
If your Konica Minolta All in One Printer displays error EF09D0, it means that characters that cannot be used have been entered. Change the file name.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
Information about ENERGY STAR® compliance and its benefits for energy efficiency.
Explains the manual's structure, notations, and guides for different operations.
Explains safety advisories (DANGER, WARNING, CAUTION) and sequence of action notations.
Explains DANGER, WARNING, and CAUTION messages to prevent injury or damage.
Describes how to send scanned documents as e-mail attachments, including requirements and basic operation.
Explains uploading scanned data to an FTP server on the network for data retrieval.
Details sending scanned data to a shared folder on a computer via SMB protocol.
Explains sending original document data as an e-mail attachment over the Internet or intranet to an Internet fax terminal.
Details the physical connection of the machine to a LAN using a LAN cable and explains LED status indicators.
Explains how to specify network parameters like DHCP, IP address, subnet mask, gateway, and DNS settings.
Specifies whether to acquire an IP address automatically from a DHCP server or use a fixed IP address.
Sets the machine’s IP address when DHCP is configured for manual input.
Details how to transmit data by touching a registered one-touch dial button for e-mail destinations.
Describes how to directly input e-mail addresses for transmission without prior registration.
Explains how to adjust scan resolution (Original Type) and density for optimal image output.
Covers functions like TX Report, 2in1, Double-sided TX, Priority TX, Timer TX, Stamp, Subject, Reply Address, and File Name.
To Next Page