What to do if Error Code EAXXXX appears because too much data is being sent from Konica Minolta All in One Printer?
If you are getting Error Code EAXXXX on your Konica Minolta All in One Printer because too much data is being sent, and a high scanning resolution has been specified, decrease the number of pages scanned at one time and scan the document again.
Why Konica Minolta bizhub 350 can receive but cannot print?
Your Konica Minolta All in One Printer might be able to receive but unable to print because data in a format that is not supported is attached, or an e-mail with no data is received. Ask the sender to send a TIFF-F file or text. Also, the received document has not been specified to be printed. To print the received document, specify the received document to be printed. If memory exceeded, print the saved documents, decrease the memory usage of this machine, and then ask the sender to send the data again.
What to do if Konica Minolta All in One Printer displays error EAX212?
If your Konica Minolta All in One Printer displays error EAX212, it means that SMTP authentication is requested. Enable the SMTP authentication settings.
What does error ED09CA mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error ED09CA, it means that an error occurred when data was being transferred. Check that the FTP server is operating properly, or check that the LAN cable is not broken.
What to do if Konica Minolta bizhub 350 displays error EF09D0?
If your Konica Minolta All in One Printer displays error EF09D0, it means that characters that cannot be used have been entered. Change the file name.
How to resolve error EABXXX on Konica Minolta bizhub 350?
If your Konica Minolta All in One Printer displays error EABXXX, it indicates that POP3 before SMTP authentication failed. Check the POP3 account and password.
What does error E40XXX mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error E40XXX, it means that the POP3 server address is not specified, connection to the e-mail server is not possible, or connection to the server is not possible due to an error in the server. Check the POP3 server address and that the POP3 server is operating properly.
Why transmission cannot be interrupted due to time required to interrupt the operation on Konica Minolta All in One Printer?
If transmission from a terminal or reception to a computer cannot be interrupted due to time required to interrupt the operation on your Konica Minolta All in One Printer, wait until the operation is interrupted. To interrupt the operation quickly, exit ImageReceiver. However, data already received at the computer but not yet processed with IP Scanner will be deleted.
How to resolve Error Code EAXXXX when network settings are incorrect on Konica Minolta All in One Printer?
If you get Error Code EAXXXX on your Konica Minolta All in One Printer due to incorrect network settings on the computer, check the TCP/IP settings on the computer.
Why does the message “Failed to create image files.” appear due to there being no storage directory on Konica Minolta All in One Printer?
If the message “Failed to create image files.” appears on your Konica Minolta All in One Printer due to there being no storage directory, create a directory.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
Information about ENERGY STAR® compliance and its benefits for energy efficiency.
Explains the manual's structure, notations, and guides for different operations.
Explains safety advisories (DANGER, WARNING, CAUTION) and sequence of action notations.
Explains DANGER, WARNING, and CAUTION messages to prevent injury or damage.
Describes how to send scanned documents as e-mail attachments, including requirements and basic operation.
Explains uploading scanned data to an FTP server on the network for data retrieval.
Details sending scanned data to a shared folder on a computer via SMB protocol.
Explains sending original document data as an e-mail attachment over the Internet or intranet to an Internet fax terminal.
Details the physical connection of the machine to a LAN using a LAN cable and explains LED status indicators.
Explains how to specify network parameters like DHCP, IP address, subnet mask, gateway, and DNS settings.
Specifies whether to acquire an IP address automatically from a DHCP server or use a fixed IP address.
Sets the machine’s IP address when DHCP is configured for manual input.
Details how to transmit data by touching a registered one-touch dial button for e-mail destinations.
Describes how to directly input e-mail addresses for transmission without prior registration.
Explains how to adjust scan resolution (Original Type) and density for optimal image output.
Covers functions like TX Report, 2in1, Double-sided TX, Priority TX, Timer TX, Stamp, Subject, Reply Address, and File Name.
To Next Page