What to do if Konica Minolta bizhub 350 displays error E6FXXX?
If your Konica Minolta All in One Printer displays error E6FXXX, it means the data is too large to be sent. Even when scanning is complete, transmission may not be possible depending on the original document. To resolve this, change the quality to fine or standard, and then send the data again.
What to do if I have connection failure with ImageReceiver on Konica Minolta bizhub 350?
If you're experiencing a connection failure with ImageReceiver on your Konica Minolta All in One Printer, first ensure that ImageReceiver is started. If it is already running, try restarting your computer.
What to do if my Konica Minolta All in One Printer displays error EAXXXX?
The EAXXXX error on your Konica Minolta All in One Printer can occur for several reasons. First, ensure the recipient's IP address is correct. Confirm that ImageReceiver is started. If the IP address is incorrect in ImageReceiver's Connection Filter, correct it and restart ImageReceiver. Restart your computer to ensure ImageReceiver is operating correctly, and re-install IP Scanner. Check your computer's TCP/IP settings and ensure the LAN cable is correctly connected. Also, verify that the recipient's computer isn't overloaded with large emails or downloads. If you're sending large scans, reduce the number of pages or the scanning resolution. Finally, check your firewall settings and adjust them as needed, consulting your network administrator if necessary.
Why my Konica Minolta bizhub 350 failed to connect to machine?
If your Konica Minolta All in One Printer won't connect, first ensure the machine is powered on, waiting 10 seconds before turning it back on if it was off. Check that the IP address entered in IP Scanner is correct, and verify the network settings on your computer. Also, confirm that your computer is connected to a network and that the LAN cable is properly connected.
Why the hole punch function cannot be specified on Konica Minolta bizhub 350?
The hole punch function on your Konica Minolta All in One Printer cannot be specified if “Booklet”, “Transparency”, “Thick2”, “Thick3”, or “Envelope” is selected. Check each setting in the printer driver. Also, for the hole punch function, the punch unit must be installed on optional finisher. Install the required optional finisher and enable it using the printer driver.
What to do if I am unable to specify desired settings on Konica Minolta bizhub 350 All in One Printer?
If you're unable to specify desired settings or print as specified on your Konica Minolta All in One Printer, it might be due to a few reasons. Some functions cannot be combined, so avoid selecting unavailable settings. An incorrect combination of functions might have been specified; double-check your settings. Also, verify the watermark settings and density. If stapling is not working, note that it's not possible with 'Thick' paper or transparencies, and it requires an optional finisher to be installed and enabled via the printer driver.
What does error E60XXX E61XXX mean on Konica Minolta bizhub 350 All in One Printer?
If your Konica Minolta All in One Printer displays errors E60XXX and E61XXX, it means that data incompatible with POP3 reception was received. This could be an e-mail with a file attachment of a format other than TIFF-F, or text that exceeds 1,000 characters per line, or large data, or an e-mail message containing no data. Check with the sender.
Why is numbering function not performed on Konica Minolta All in One Printer?
If the numbering function is not being performed on your Konica Minolta All in One Printer, it might be because the “Collate” (for Windows) or “Collated” (for Mac OS X) check box is selected in the print setup dialog box. Clear the “Collate” or “Collated” check box.
How to fix form that is not printing properly on Konica Minolta bizhub 350?
If the form is not printing properly from your Konica Minolta All in One Printer, this may be because the available computer memory space is not sufficient. Simplify the form to reduce the data size.
How to fix image that is not printing properly on Konica Minolta bizhub 350 All in One Printer?
If the image is not printing properly from your Konica Minolta All in One Printer, this may be because the available computer memory space is not sufficient. Simplify the image to reduce the data size.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
Information about ENERGY STAR® compliance and its benefits for energy efficiency.
Explains the manual's structure, notations, and guides for different operations.
Explains safety advisories (DANGER, WARNING, CAUTION) and sequence of action notations.
Explains DANGER, WARNING, and CAUTION messages to prevent injury or damage.
Describes how to send scanned documents as e-mail attachments, including requirements and basic operation.
Explains uploading scanned data to an FTP server on the network for data retrieval.
Details sending scanned data to a shared folder on a computer via SMB protocol.
Explains sending original document data as an e-mail attachment over the Internet or intranet to an Internet fax terminal.
Details the physical connection of the machine to a LAN using a LAN cable and explains LED status indicators.
Explains how to specify network parameters like DHCP, IP address, subnet mask, gateway, and DNS settings.
Specifies whether to acquire an IP address automatically from a DHCP server or use a fixed IP address.
Sets the machine’s IP address when DHCP is configured for manual input.
Details how to transmit data by touching a registered one-touch dial button for e-mail destinations.
Describes how to directly input e-mail addresses for transmission without prior registration.
Explains how to adjust scan resolution (Original Type) and density for optimal image output.
Covers functions like TX Report, 2in1, Double-sided TX, Priority TX, Timer TX, Stamp, Subject, Reply Address, and File Name.
To Next Page