Paper Information
5
5-12 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
5.2
5.2.4 Paper Size
*1: Either JIS or ISO standard sizes are used for B series by default depending on the area. For JIS/ISO
switching, please contact your service representative.
*2: Foolscap refers to 8 e 13 w, 8.12 e 13.2 w, 8.25 e 13 w, and 8.5 e 13 w.
*3: Wide paper varies in dimensions even though having the same size name. Be sure to check and enter
actual dimensions of the wide paper to be used.
Paper trays Available sizes
Paper Feeder Unit PF-703 (Tray 3 to
Tray 11)
Standard:
SRA3 w, A3 w, B4 w
*1
, A4 w/v, SRA4 w, B5 w/v
*1
, A5 v,
12 × 18 w, 11 × 17 w, 8.5 × 14 w, 8.5 × 11 w/v, 9 e 11 v,
Foolscap
*2
, 8K w, 16K w/v, Postcard w*
*: Use the small size guides to load postcards into the paper
feeder unit. For details, see "7.3.6 Loading Small Size Paper
in Paper Feeder Unit PF-703/PF-706 (Trays 3 to 8)" of [Us-
er’s Guide - Main Body]. (Postcards cannot be used in some
areas.)
Custom:
Min. Width 150 mm e Length 133 mm to max. Width 324 mm
e Length 483 mm / min. Width 5.89" × Length 5.26" to max.
Width 12.76" × Length 18.98"
Using small size guides: min. Width 95 mm e Length 133 mm
/ min. Width 3.73" × Length 5.26"
Wide Paper
*3
:
A3W w, B4W w
*1
, A4W w/v, B5W w/v
*1
, A5W v,
12 × 18W w, 11 × 17W w, 8.5 × 11W w/v, 5.5 × 8.5W v
Tab Paper:
A3T w, B4T w
*1
, A4T w/v, B5T w/v
*1
, 11 × 17T w,
8.5 × 11T w/v, 5.5 × 8.5T v
Available to specify the detectable standard sizes for each
tray in the Tray Setting which provides the following options:
•A5 v or 5.5 × 8.5 v
•SRA3 w or 12 × 18 w
• 8 × 1 3 w, 8.12 × 13.2 w, 8.25 × 13 w, 8.5 × 13 w or
8.5 × 14 w
•(8K w and 16K w/v) or (B4 w
*1
, B5 w/v
*1
, 11 × 17 w,
8.5 × 11 v)
These options and their default sizes vary depending on the
area.
To Next Page
Loading...
Need help?
General
