bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information 1-19
1.8 Basic Setting - Paper Presetting
1
1.8.2 Setting Paper Size: Postcard
NOTICE
Postcards are available in some areas only.
1 Press [Paper Presetting] on the Copy Screen to display the Paper Presetting Screen.
2 Press a tray key provided under [Paper Tray] to select the tray to change the setting.
3 Press [Change Set] on the right side of [Paper Size].
The Size Setting Screen will be displayed.
4 Press [Postcard].
% If you select [Tray 1] or [Tray 2] in step 2, the postcard adapter (option) is required to be installed in
the selected tray. Contact your service representative, if desired.
% If you select [Tray 3], [Tray 4], [Tray 5], [Tray 6], [Tray 7], [Tray 8], [Tray 9], [Tray 10], or [Tray 11] of
Paper Feeder Unit PF-703 or [Tray 3], [Tray 4], [Tray 5], [Tray 6], [Tray 7], or [Tray 8] of Paper Feed-
er Unit PF-706 in step 2, use the small size guides of the selected tray. For details, see "5.3.6 Load-
ing Small Size Paper in Paper Feeder Unit PF-703/PF-706 (Trays 3 to 8)" of [User’s Guide - Copier].
5 Press [OK] on the Size Setting Screen to return to the Paper Presetting Screen.
1.8.3 Setting Paper Conditions: Change Set
% When changing the paper conditions, it is recommended that you first recall the desired setting by op-
erating the "Recall" procedure, check the contents, and then modify the conditions as desired. For de-
tails of the "Recall" procedure, see "6.6.8 Setting Paper Conditions: Recall" of [User’s Guide - Copier].
This section selectively describes the changed steps of the Change Set operation in setting paper conditions.
For details of unchanged steps, see "6.6.9 Setting Paper Conditions: Change Set" of [User’s Guide - Copier].
1 No change
2 No change
3 No change
4 No change
5 Press [Weight].
The Weight Screen will be displayed.
% Select the desired weight key provided under [Weight].
% 301-350 g/m
2
/ 81-93 lb Bond paper is available only for Tray 4, Tray 7, and Tray 10 of Paper Feed-
er Unit PF-703 or Tray 4 and Tray 7 of Paper Feeder Unit PF-706.
To Next Page
Loading...
Need help?
General
