bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information 5-17
5.4 Printing Operations - Tray Setting
5
Paper Type Description
5.4.2 Outlines of Tray Setting Operations
This section describes the basic operating procedure of Tray Setting which can be performed by pressing
[Tray Setting] on the Machine Screen.
For details of Tray Setting provided to the following trays, see appropriate sections of [User’s Guide - Main
Body].
4.2.3 to 4.2.10: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Tray 3 to Tray 11), Paper Feeder
Unit PF-706 (Tray 3 to Tray 8)
4.2.11: PI-PFU tray
4.2.12: Perfect Binder PB-503 cover tray
4.2.13: post inserter of Folding Unit FD-503
4.2.14: Post Inserter PI-502 mounted on Finisher FS-532
5.4.3 Setting Paper Size
This section selectively describes the added or changed contents resulting from the modification of specifi-
cations.
Selecting [Postcard]
NOTICE
Postcards are available in some areas only.
1 Select [Postcard] on the Size Setting Screen.
The Postcard Screen will be displayed.
% If you select [Tray 1] or [Tray 2] for Paper Tray, the postcard adapter (option) is required to be in-
stalled in the selected tray. Contact your service representative, if desired.
% If you select a tray from [Tray 3] to [Tray 11] for Paper Tray, use the small size guides of the selected
tray. For details, see "7.3.6 Loading Small Size Paper in Paper Feeder Unit PF-703/PF-706 (Trays 3
to 8)" of [User’s Guide - Main Body].
Paper Type Description
PrePrinted Specify "PrePrinted" for a tray when it is used to print on coated paper that is
already offset printed. Also, if a tray that is set to "Coated" encounters problems
feeding coated paper, change the setting to "PrePrinted."
Important:
• Preprinted paper can only be loaded into Paper Feeder Unit PF-703 (Tray
3 to Tray 11), PI-PFU (PI-PFU 1 to PI-PFU 3), or Paper Feeder Unit PF-706
with Pre-printed Paper Feeding Kit PP-701 attached.
• PrePrinted paper cannot be loaded into the main body trays (Tray 1, Tray 2).