2-1
2.1 Printing Flow
2 Let's Make Prints
This chapter describes a basic print workflow using this machine.
First confirm the basic flow to print data, then add detailed settings and adjustment to meet your requirements.
For information about application settings of this machine and adjustment procedures, refer to the HTML User's
Guide.
2.1 Printing Flow
First check that your original data is printed in the following flow.
The detailed operations or setting procedures are described in the reference page for each step.
The User's Guide CD supplied with this machine includes a sample PDF file for printing. This file is helpful if you have
no original data.
Step 1: Prepare the printer driver and applications
Install the printer driver and applications in your computer.
After installation is completed, configure information of the mounted devices
using the printer driver to use optional functions.
For details, refer to the following pages:
- To install the printer driver: Refer to page 3-1.
- To install applications: Refer to page 3-13.
Step 2: Load paper into a tray
Load paper into the Main Body Tray or an optional paper tray.
For details, refer to the following pages:
- To load paper into the Main Body Tray: Refer to page 4-1.
- To load paper into Paper Feeder Unit: Refer to page 4-3.
- To load paper into another optional device: Refer to page 4-4.
To Next Page
Loading...
Need help?
General
