To Next Page

To Previous Page

5-31

5.2 Image Quality Adjustment

Color Density Control

If an optional Relay Unit RU-509 is mounted on this machine, you can configure a setting so that this machine

automatically executes calibration at periodic intervals.

Calibration is executed every arbitrarily specified number of sheets, and you can keep printing using the appropriate

density.

Tips

The printed chart is included in the print count.

)Auto setting of Color Density Control

A Press [Adjustment] on the [MACHINE]

screen.

B Press [Color Density Control].

C Press [Basic Setting].

Quick Guide1
Notations and Symbols Used in this Manual2
Exclusion of Liability3
Impermissible Operating Conditions3
Intended Use3
Target Groups3
Configuration and Usage of this Guide4
Display Resolution5
How to Display the Top Page of the HTML User's Guide5
HTML User's Guide Operating Environment5
In a Macintosh Environment5
In a Windows Environment5
Supported Operating Systems/Browsers5
Conventions Used in this Guide6
- Table of Contents7
- Checking the Mounted Optional Devices7
- Make a Note about this Machine Information7
- Checking Network Information8
- Contents10
- Before Getting Started13
- Power Supply13
- Turning the Power on13
- Turning the Power ON/OFF13
- Image Controller14
- Turning the Power off (Image Controller IC-415)15
- Turning off the Power (Image Controller IC-308)18
- Power-Saving Function20
- Available Operations in this Machine21
- Copy Functions21
- Major Functions of this Machine21
- Print Functions21
- Device Control Function (Webtools)22
- Hold Function of Print Jobs Using the HDD22
- Scan Functions22
- Application Functions23
- Fiery Command Workstation23
- Printer Delete Utility24
- Fiery Hot Folders25
- Fiery Remote Scan25
- Let's Make Prints26
- Printing Flow26
- Step 1: Prepare the Printer Driver and Applications26
- Step 2: Load Paper into a Tray26
- Step 3: Configure Information of the Paper Loaded into a Tray in this Machine27
- Step 4: Use the Printer Driver to Print Data27
- Step 5: Check the Finishing28
- Characteristics of Printer Driver29
- In a Macintosh Environment29
- In a Windows Environment29
- Installing Software29
- Installing the Printer Driver29
- Operating Environment29
- In a Windows Environment30
- Installation30
- Default Setting35
- In a Macintosh Environment36
- Installation36
- Default Setting39
- Fiery Utility41
- Fiery Utility Setup41
- Function Overview41
- Installing Applications41
- Operating Environment41
- In a Windows Environment42
- Installation42
- In a Macintosh Environment44
- Installation44
- Starting Applications45
- Starting Fiery Command Workstation45
- Starting Fiery Hot Folders47
- Starting Fiery Remote Scan47
- Basic Operations48
- Loading Paper48
- Loading Paper into the Main Body Tray48
- Loading Paper into the Paper Feeder Unit PF-602M50
- Loading Paper in Post Inserter of Folding Unit FD-50351
- Paper Setting52
- Specifying Paper Information for a Tray52
- Printer Driver Functions57
- Printer Driver Setting57
- [Color Mode]: Select an Output Color57
- [Color Mode]: Basic Settings58
- [Color Mode]: Expert Settings59
- Adjustment Flow60
- Both Sides Adjustment60
- Maintaining the Finishing Quality60
- Making the both Sides Adjustment for each Tray60
- Chart Adjustment61
- Gap Adjustment61
- Scan Measurement Adjustment61
- Zoom and Image Shift Adjustment61
- Image Quality Adjustment84
- To Manage the Daily Image Quality84
- To Specify the Reference Image Quality84
- Daily Image Quality Management (Calibration)85
- Calibration Timing86
- Maximum Density Auto Adjustment (RU)88
- Auto Setting of Color Density Control90
- Color Density Control90
- Manual Setting of Color Density Manual Control93
- Executing Calibration Using the Image Controller95
- Specifying the Reference Image Quality98
- Adjusting the Finisher and Saddle Stitcher99
- Opening the Screen to be Adjusted99
- Adjustable Settings100
- Replacing a Toner Bottle102
- Replenish and Replace Consumables102
- Troubleshooting102
- Replacing a Staple Cartridge104
- Replacing a Waste Toner Box106
- Clearing Paper Jams108
- How to View the Animation Guide108
- [JAM Position] Screen108
- Illustration Screen for Jam Handling109
- If the Specified Paper Is Not Found111
- HDD Space Insufficiency113
- If an Error Has Been Displayed During Scanning113
- Hue Adjustment114
- When Calibration Is Executed for Daily Management114
- When Calibration Is Not Executed114
- Image Position Adjustment115
- Appendix116
- Confirm the Setting Required for the Target Finishing in an Operation Example116
- Good Use of the HTML User's Guide116
- Let's Master the Search Function116
- External Components117
- Name of each Component117
- Internal Components119
- Control Panel Layout121
- Convenient Use of Scan Function (Scan to SMB)123
- In a Windows Environment123
- Step 1: Prepare the Destination Computer123
- In a Macintosh Environment125
- Step 2: Connect this Machine to the Network125
- Step 3: Prepare the Operating Environment for SMB Transmission125
- Step 4: Configure Settings According to Your Environment126
- Step 5: Send Scan Data to a Public Folder126
- Major Specifications127
- Feeding-Related Optional Devices128
- Paper Feeder Unit PF-602M128
- Paper Feeder Unit PF-707129
- Large Capacity Unit LU-202130
Multi Bypass Tray MB-506131
- Post Inserter (Folding Unit FD-503)132
Post Inserter PI-502133
Output-Related Optional Devices134
Relay Unit RU-516135
- Large Capacity Stacker LS-505137
- Large Capacity Stacker LS-506138
- Saddle Stitcher SD-506139
- Perfect Binder PB-503140
- Finisher FS-531141
- Finisher FS-532143
- Finisher FS-612146
Multi Puncher GP-501149
Auto Ring Binder GP-502150
- Banner Tray Unit MK-740151
- Authentication Unit AU-201S152
Electronic Optional Devices152
- Original-Related Optional Devices153
- Weight for each Size and Copying Speed154
- Weight for each Size154
- Copying Speed154
- Maximum Paper Size and Printing Area157

Brand	Konica Minolta
Model	bizhub press c1070
Category	Printer
Language	English

Konica Minolta bizhub press c1070 User Manual

Table of Contents

Other manuals for Konica Minolta bizhub press c1070

Questions and Answers:

Konica Minolta bizhub press c1070 Specifications

Related product manuals