3-16
3.2 Installing Applications
In a Macintosh environment
)Installation
Start the installer from the User Software DVD supplied with this machine, then install Fiery Utility on your computer.
This guide describes how to install Fiery Command WorkStation.
A Insert the User Software DVD into the DVD drive of the computer.
NOTICE
In OS X 10.7 or later, even when the User Software DVD is inserted into the drive, the DVD icon may not be
displayed on the desktop. In this case, the setting for displaying the icon on the desktop may be disabled. Check
whether or not the desktop display setting is disabled in "Preferences" of the Finder.
B Copy the [Fiery Applications.dmg] file to the desktop, then double-click it.
The Disk Image file opens.
C Double-click the [Fiery Command Workstation] file.
The installer starts.
- For [Fiery Remote Scan], double-click [Fiery Remote Scan].
- For [Fiery Hot Folders], double-click [Fiery Hot Folders].
D Select the [I agree to the EFI Terms Of
Service] check box.
E Click [Install].
The screen for entering [Name] and [Password] is
displayed during processing. Enter the computer
administrator's name and password into the
respective fields.
To Next Page
Loading...
Need help?
General
