Konica Minolta CA-100Plus - Page 23

21
Installation/Connection
<Out of Measurement Range>
● When the measurement range is exceeded Digital display : “– – –”
Analog display : Not lit
LCD display : “OVER”
● When Lv (luminance) is below 0.05 cd/m
2
Digital display : blinking
(white calibration equivalent to Analog display : blinking
Konica Minolta's calibration standard) : Measurement mode : blinking
● When T∆uvLv measurement mode Digital display : “– – –”
is selected and T and ∆uv are out of (T and ∆uv)
the display range