4
System
• Do not subject the CM-3700A to strong impact or vibration. Doing so may cause deterioration of perfor-
mance or breakdown.
• The specimen measuring port and integrating sphere are extremely precise components, and great care
should be taken to prevent them getting dirty or exposing them to impacts. When the CM-3700A is not in
use, be sure to attach a target mask to the measuring port to prevent entry of foreign matter.
• The CM-3700A may cause interference if used near a television, radio, etc.
• Since the CM-3700A uses a microcomputer, external magnetic noise may cause malfunction. In this case,
turn the power OFF, and wait 30 minutes, and then turn it ON again.
About Transmittance Measurement
• Do not spill a specimen or other liquid on the instrument. If any liquid is spilled on the instrument, wipe it off
immediately with a soft, dry cloth.
To Next Page
Loading...
