Konica Minolta CM-3700A - Table of Contents; Contents

6
CONTENTS
Safety Precautions .................................. 1
INTRODUCTION ....................................... 2
Packing Materials ................................................. 2
Notes on Use ........................................................ 3
Notes on Storage.................................................. 5
Notes on Cleaning ................................................ 5
Disposal Method ................................................... 5
CONTENTS ............................................... 6
Using the CM-3700A
Standard Accessories ............................. 8
Optional Accessories .............................. 9
System Diagram .................................... 10
Names and Functions of Parts ............. 11
Measurement Procedure ....................... 12
Flow of Preparation and Measurement .............. 12
Connecting a Personal Computer ........ 13
Connecting the AC Adapter .................. 14
Turning Power ON and OFF .................. 15
Attaching a Target Mask ........................ 16
Notes on Use of Target Mask ............................. 16
Calibration of Reflectance and
transmittance measurements ............... 17
Calibration for Reflectance Measurements ........ 17
White calibration data ......................................... 17
Calibration for Transmittance Measurements ..... 17
100% calibration data ......................................... 17
Performing calibration ......................................... 18
Attaching the Zero Calibration Box ..... 19
Notes on Use of Zero Calibration Box ................ 19
Attaching the White Calibration Plate .. 20
Notes on Use of White Calibration Plate ............ 20
Updating White Calibration Data ........................ 20
Attaching the Transmittance Zero
Calibration Plate (Optional Accessory) ..... 21
Notes on Use of Transmittance Zero Calibration Plate ... 21
Performing 100% calibration ................ 22
S etting up instrument for 100% calibration to air.... 22
Setting up instrument for 100% calibration to water ... 22
Setting a Specimen ............................... 23
Reflectance measurement ................................. 23
The sample holder for measuring the reflectance ... 24
About opacity measurements ............................. 24
Transmittance measurements ............................ 25
The transmittance chamber for transmittance measurement .... 26
About haze measurements ................................. 26
Cleaning the CM-3700A and Accessories ... 27
Zero Calibration Box and White Calibration Plate .. 27
Target Mask ....................................................... 27
Inside Integrating Sphere ................................... 27
Receiving Window ............................................. 28
ERROR MESSAGE ................................. 29
TROUBLESHOOTING GUIDE ................ 31
Explanations
lIIumination/Observation System ......... 34
Measuring Reflected Colors ............................... 34
Measuring Transmitted Colors ............................ 34
Illumination and Measurement Areas .. 35
Target Mask ....................................................... 35
Measurement Area ............................................. 35
System Configuration ........................... 35
Fluorescent Measurement .................... 36
UV Adjustment ................................................... 36
WHEN FLUORESCENT CALIBRATION IS
PERFORMED .................................................... 36
WHEN FLUORESCENT CALIBRATION IS NOT
PERFORMED .................................................... 36
Dimensions ............................................ 37
Specifications ........................................ 38