15
INSERTING THE BATTERY
This digital camera uses one NP-700 lithium-ion battery. Before using the battery, read
the safety warnings on pages 3 and 4 of this manual. When replacing the battery, the
camera should be turned off (p.19).
1.Slide the battery-chamber door toward the side of the camera to release the safety
catch. Open the door.
2.Slide the battery into the battery chamber with the battery terminals first.
3.Close the battery-chamber door and slide it toward the camera to engage the safety
catch.
After installing the battery, the set-time/date message may appear on the monitor, see
page 20 on how to set up the clock. An internal battery protects the clock, calender, and
memory settings for about six days if the battery is in the camera for approximately 24
hours.
21 3
To Next Page
Loading...
