94
Confirm the transfer-mode option in section 3 of the setup
menu is set to PictBridge. To print the images in the
camera’s internal memory, remove the memory card from
the camera. Connect the camera to a PictBridge
compatible printer using the camera’s USB cable. The
larger plug on the cable is connected to the printer. Open
the AV out/ USB port cover and insert the smaller plug of
the cable into the camera. Insert the plug in straight,
never at an angle. Turn the camera on; the PictBridge
screen is displayed automatically.
Individual still images can be selected for printing on the
PictBridge screen. For other printing options, see the
menu navigation section on page 96.
The zoom lever can be used to switch between single-
frame, index, and enlarged display formats.
PICTBRIDGE
Use the left/right keys of the controller to
display the image to be printed.
Total number of prints
Number of copies
Press the up key to select the number of
copies to be printed. To deselect an image
for printing, press the down key until the
number of copies reaches zero.
Repeat the previous steps until all the
images to be printed are selected. Press
the central button of the controller to
continue.
:select:move :print
Reset default
Date/Time set
PictBridge
Video out
Data storage
Transfer mode
Remote camera
DATA-TRANSFER MODE
To Next Page
Loading...
