1
39
The built-in flash can be used, but the rate of capture is reduced because the flash must
recharge between frames. Date imprinting (p. 50) also reduces the rate of capture.
Compose the picture as described in the basic
recording operation section (p. 24). Press the
shutter-release button partway down to lock the
exposure and focus for the series (1). Press and
hold the shutter-release button all the way down (2)
to begin taking pictures. When the shutter-release
button is pressed and held, the camera begins
recording images until the maximum number has
been taken or the shutter button is released. The
frame counter is adjusted after the series has been
taken.
Continuous advance
2
The continuous advance drive mode takes up to four images when the shutter-release
button is pressed and held. With the image-size setting of 2560 x 1920, the maximum
rate of capture is 1.6 fps. The continuous advance drive mode is selected with the down
key of the controller (p. 37).
To Next Page
Loading...
