29
FLASH RANGE - AUTOMATIC OPERATION
The camera automatically controls the flash output. For well-exposed images, the subject
must be within the flash range. Because of the optical system, the flash range is not the
same at the lens’ wide-angle position as it is at the telephoto position. The flash range
can be changed with camera sensitivity (ISO), see page 46.
FLASH SIGNALS
The indicator lamp above the LCD monitor indicates the status
of the flash. When the lamp is orange and blinks quickly, the
flash is charging and the shutter will not release.
Wide-angle position Telephoto position
0.2m ~ 2.4m (0.7 ft. ~ 7.9 ft.) 0.5m ~ 2.0m (1.6 ft. ~ 6.6 ft.)
The display button controls the LCD monitor display. The display switches between full
display and live image only each time the button is pressed. If the display button is
pressed and held, the LCD-brightness adjustment screen is displayed, see page 74.
DISPLAY BUTTON - RECORDING MODE
Full display Live image only
To Next Page
Loading...
