91
For the camera to be connected directly to
the computer and used as a remote
imaging device, the computer must be
equipped with a USB port as a standard
interface. The computer and the operating
system must be guaranteed by their
manufacturers to support USB interface.
See chart for system requirements.
The remote-camera driver software must
be installed. Specific application software,
such as Microsoft Net Meeting, is required
to view the images. This function cannot
be used with Macintosh computers.
REMOTE CAMERA SYSTEM REQUIREMENTS
The driver needs only to be installed once. This
driver is not compatible with Macintosh operating
systems.
Before connecting the camera to the computer,
place the Digital Camera Software CD-ROM in the
CD-ROM drive. The launcher should automatically
activate. To install the driver, click on the “Camera
Support Applications” button, then click on the
“Install the Remote-Camera Driver” button.
Follow the instructions on the screen to install the
driver.
Minimum system requirements
Pentium II 300MHz or later
Windows XP, 2000 Professional,
Me, and 98 Second Edition
128MB of RAM. 256MB with Windows XP.
200MB of hard-disk space
800 X 600 16-bit color monitor
Remote camera tested with Microsoft Net
Meeting and Windows Messenger
INSTALLING THE REMOTE CAMERA DRIVER
To Next Page
Loading...
