22 RECORDING - BASIC OPERATION
LCD MONITOR DISPLAY
If the shutter speed falls below the point where the camera can be
hand held safely, the camera-shake warning indicator appears on
the monitor. Camera shake is slight blurring caused by subtle hand
motion and is more pronounced at the telephoto position of the
lens than at the wide-angle position. Although the warning
appears, the shutter can still be released. If the warning appears,
place the camera on a tripod or use the built-in flash.
CAMERA-SHAKE WARNING
Automatic digital subject program display (p. 25)
Image size (p. 42)
Image quality (p. 42)
Camera-shake warning
Focus signal (p. 27)
Recording mode
Flash modes (p. 28)
Focus frame
Internal-memory indicator (p. 19)
Battery-condition indicator (p. 16)
Frame counter (p. 43)
Drive mode (p. 37)
To Next Page
Loading...
