93
Refer to the applications instruction manual on how the view
the remote feed. With Microsoft Net Meeting, simply click on
the play button. The option dialog box allows remote control
over some of the camera’s functions. By clicking
on the source button in the video tab, zoom and
focus controls can be accessed; the controls are
located on the camera control tab of
the dialog box. Image magnification
can be adjusted with the zoom slider.
Clicking the auto check box on the
focus option focuses the camera.
However, focus is not continuous and
the box must be checked each time
focusing is required.
NOTES ON REMOTE CAMERA OPERATION
When using the remote camera, exposure, white balance, and camera sensitivity are set
to auto. The optical and 4X digital zoom are active. There are no menu controls. The flash
is disabled. There is no audio.
The camera can be focused periodically by pressing the
shutter-release button partway down. The AF system does
not continually focus when the button is pressed and held so
the operation should be repeated as the subject distances
changes.
Because of the data rate, there may be delays when the
camera is focused or zoomed.
To Next Page
Loading...
