ENGLISH
IP camera
FULL MANUAL
Table of contents:
• Introduction (p. 2)
• Safety precautions (p. 2)
• Packaging
content (p. 2)
• System
requirements (p. 2)
• T
echnical specifications (p. 2)
• Product
description (p. 3)
• User
instructions (p. 5)
• W
arranty (p. 22)
• Disclaimer
(p. 22)
• Dispos
al (p. 22)
Introduction:
Watch over your property with this genuine Plug & Play IP camera without the need for any IP setting or router
configuration. Easy and simple installation in just a few minutes, the free uCare Cam App allows you to watch
on your Smartphone, anytime and anywhere. Advanced features provide you with an email or App notification
when motion is detected. Photo and/or video footage can be play backed at any time you require.
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Safety precautions:
This product should ONLY be opened by an authorised technician when service is required. Disconnect the
product from the mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Packaging content:
1x IP camera
1x Camera mount
1x AC/DC adapter
1x Quick start guide
1x CD with complete manual
System requirements:
• Device running on iOS 5.0 or above
• Device running on Android 4.0 or above
• WiFi Router
Technical specifications:
Specifications: SEC-IPCAM100B/W SEC-IPCAM105B/W
Video codec: MJPEG
Resolution:
VGA 640x480 / QVGA 320x240 / QQVGA 160x120
Frame rate: 1~25fps
Image sensor: CMOS
Lens: 3.6mm 3.0mm
Night vision: 1 Lux, 10 meter 1 Lux, 5 meter
Flash memory: 8 MB
Card storage: up to 32 GB SDHC (not included)
Audio:
2-way
(integrated microphone + loudspeaker)
1-way
(integrated microphone)
Networking Protocol:
IPV4, ARP, TCP, UDP, ICMP, DHCP Client, NTP Client, DNS Client, SMTP
Client, P2P Transmission
Built-in network interfaces: 802.11b/g/n WLAN
2
To Next Page
Loading...
