Korber Solutions LTI MOTION ServoOne CM - Overview of the Connections

18
Electrical installation
Operation Manual Expansion Module SO CM-E
1800.202B.0-01 Date: 02/2019
Abbreviation Designation Details
X1/ DC Link DC link supply via terminals
Only on model SO CM-E.x0xx.1/(2) add.
connections for second expansion
module
X2/ 24 V DC 24 V control supply via terminal
See Chapter 4.8
DC Link -/+ DC link supply busbars
See Chapter 4.6.3
24 V DC Control supply busbars
See Chapter 4.6.1
LEDs Error / Voltage
See Chapter 5.1
X3/ XC IN Cross-communication input
See Chapter 4.10
X4/ XC OUT Cross-communication output
X5/ REL Output Relay contact (RO02) programmable
See Chapter 4.9.2
X6/ State
Digital inputs (programmable)
Test pulse outputs
See Chapter 4.9.3
X7/ ES "Internal" quick shutdown
See Chapter 4.9.2
F+ = right
F- = left
Fuses for DC link cable protection
See Chapter 4.7
A Service cover
Connection for protective earth conductor/
earthing
See Chapter 4.4
Table 4.2 Key to the SO CM-E module layout
4.3 Overview of the connections
In the following you will nd the layout for the ServoOne CM-E expansion module with
the corresponding positions of the connectors and terminals.
24 V DC
DC Link +/-
X1/ DC Link
X2/ 24V DC
X3
X4
X6/State
X7/ES
F-
F+
A
X5/REL
LEDs
Figure 4.1 Layout, ServoOne CM-E expansion module