EasyManua.ls Logo

Korber Solutions LTI MOTION ServoOne CM - 1 General; Target Group; Prerequisites; Pictograms

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
General
Operation Manual Expansion Module SO CM-E
1800.202B.0-01 Date: 02/2019
1 General
The product DVD from LTI Motion GmbH contains the complete documentation for all
product series. The documentation for a product series includes the operation manual
(hardware description), device help (software description) as well as further user manuals
(e.g. eld bus description) and specications. The documents are available in PDF
format.
1.1 Target group
Dear user,
The documentation forms part of the device and contains important information on
operation and service. It is aimed at all persons who undertake mounting, installation,
commissioning and servicing work on the product.
1.2 Prerequisites
Prerequisites for the usage of devices from LTI Motion GmbH:
y The documentation on the devices is to be stored so it is legible, accessible at
all times and for the entire life of the product.
y The user must read and understand the documentation on the device.
y Qualication: to prevent injury or damage, personnel may only work on the
device if they have electrical engineering qualications.
y Knowledge required:
National health and safety regulations (e.g. DGUV V3 in Germany)
Mounting, installation, commissioning and operation of the device
Work in other areas, for example transport, storage and disposal is only allowed to be
undertaken by trained personnel.
1.3 Pictograms
The pictograms used in this operation manual signify the following for the user:
NOTE:
Useful information for the user.
Reference to other documents.
You will nd the "safety instructions and warnings" used in this operation manual in
chapter 2 Safety.
1.4 Disclaimer
Following the documentation on the devices from LTI Motion GmbH is a prerequisite:
y For safe operation.
y To achieve stated performance features and product characteristics.
LTI Motion GmbH does not accept any liability for injuries, damage or nancial losses
that result from the failure to follow the documentation.
1.5 Reference documents
NOTE:
You will nd all reference documents for this device on our web site at
www.lti-motion.com/socm

Table of Contents