- 4 -
parameters are in Column 7, number 2, so just hold down [MENU] and
press “72”. Note that this also corresponds to the whole organizational
scheme of the Manual (Page 6.4.x etc.)
In Global Mode, you only have to use 1 number, because there is only 1
page per column. In other words, hold [MENU] and press 1, or hold
[MENU] and press 2, etc.
☞ Basic Guide, Page 14.
4. What version of software (OS) in my Karma?
Watch the display as you turn it on. The software release number is
displayed under “KARMA Music Workstation” at the bottom of the
screen, next to KORG.
OS Software releases are available from Korg USA, Korg Germany, Korg
Japan, and other distributors on their web sites. There are also complete
instructions on how to install it, in the applicable language. There are
direct links on my site at:
http://www.karma-lab.com -> [Specs, Manuals & Updates]
5. My Karma crashes/freezes on start up!
You may have attempted to load corrupted .PCG data, or some other
similar problem. In any event, you can solve this problem by resetting
your Karma:
1. Turn off your Karma.
2. Reset Internal Memory by holding both the [MENU] and [9] keys
down, while turning the Power On. You will see “Now writing Into
Internal Memory”. Then you can release the keys. Note: THIS
ERASES ALL INTERNAL DATA.
3. Reload Preload.PCG from the Preload floppy disk which is included
with KARMA, or reload your own data from your backup floppies (you
do have backups, of course, right? ;-)
6. What is a timbre?
A timbre is a word that essentially means “separate tone color”. It is
fairly commonly used interchangeably with “instrument,” “program,” etc.
It is also the word used to describe the 8 “tracks” that are available in a
Combi, in order to differentiate the fact that you can’t actually record
To Next Page
Loading...
